Данное приложение, содержащее все необходимые для работы с БД Oracle библиотеки, может быть установлено в систему Debian виде пакета |
Для работы последней версии ActiveMQ необходимо наличие на сервере Oracle Java версии 8. Установка может быть выполнена следующим образом:
root@server:~# echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main" | tee /etc/apt/sources.list.d/webupd8team-java.list && \ echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu xenial main" | tee -a /etc/apt/sources.list.d/webupd8team-java.list && \ apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys EEA14886 && \ echo oracle-java8-installer shared/accepted-oracle-license-v1-1 select true | sudo /usr/bin/debconf-set-selections && \ aptitude update && \ aptitude install oracle-java8-installer |
Для Debian Wheezy рецепт тот же, но xenial
следует заменить на trusty
.
root@server:~# java -version java version "1.8.0_144" Java(TM) SE Runtime Environment (build 1.8.0_144-b01) Java HotSpot(TM) 64-Bit Server VM (build 25.144-b01, mixed mode) |
Конфигурация экземпляра брокера, необходимая для работы провижининга состоит из нескольких частей, описанных ниже.
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd"> <!-- Allows us to use system properties as variables in this configuration file --> <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" /> <!-- The <broker> element is used to configure the ActiveMQ broker. --> <broker xmlns="http://activemq.apache.org/schema/core" brokerName="provisioning" dataDirectory="${activemq.data}"> <destinationPolicy> <policyMap> <policyEntries> <policyEntry topic=">" > <!-- The constantPendingMessageLimitStrategy is used to prevent slow topic consumers to block producers and affect other consumers by limiting the number of messages that are retained For more information, see: http://activemq.apache.org/slow-consumer-handling.html --> <pendingMessageLimitStrategy> <constantPendingMessageLimitStrategy limit="1000"/> </pendingMessageLimitStrategy> </policyEntry> </policyEntries> </policyMap> </destinationPolicy> <!-- The managementContext is used to configure how ActiveMQ is exposed in JMX. By default, ActiveMQ uses the MBean server that is started by the JVM. For more information, see: http://activemq.apache.org/jmx.html --> <managementContext> <managementContext createConnector="false"/> </managementContext> <!-- The transport connectors expose ActiveMQ over a given protocol to clients and other brokers. For more information, see: http://activemq.apache.org/configuring-transports.html --> <transportConnectors> <!-- DOS protection, limit concurrent connections to 1000 and frame size to 100MB --> <transportConnector name="openwire" uri="tcp://127.0.0.1:61616?maximumConnections=1000&wireFormat.maxFrameSize=104857600"/> <transportConnector name="stomp" uri="stomp://127.0.0.1:61613?transport.hbGracePeriodMultiplier=1.5"/> </transportConnectors> <!-- destroy the spring context on shutdown to stop jetty --> <shutdownHooks> <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" /> </shutdownHooks> </broker> <camelContext xmlns="http://camel.apache.org/schema/spring" id="camel"> <route> <from uri="oracleTopic:topic:AIS_NET.HP_COMMANDS_1?clientId=ActiveMQ&durableSubscriptionName=HP"/> <to uri="activemq:queue:hydra_commands_1"/> </route> <route> <from uri="activemq:queue:hydra_command_results_1"/> <to uri="oracleTopic:topic:AIS_NET.HP_COM_RES_1?clientId=ActiveMQ&durableSubscriptionName=HP"/> </route> <route> <from uri="oracleTopic:topic:AIS_NET.HP_PROFILES_1?clientId=ActiveMQ&durableSubscriptionName=HP"/> <to uri="activemq:queue:hydra_profiles_1"/> </route> <route> <from uri="oracleTopic:topic:AIS_NET.HP_EQUIPMENT_BINDS_1?clientId=ActiveMQ&durableSubscriptionName=HP"/> <to uri="activemq:queue:hydra_equipment_binds_1"/> </route> </camelContext> <bean id="activeMQConfig" class="org.apache.activemq.camel.component.ActiveMQConfiguration"> <property name="cacheLevelName" value="CACHE_CONSUMER" /> <property name="concurrentConsumers" value="1" /> </bean> <bean id="connectionFactoryOracleAQTopic" class="oracle.jms.AQjmsFactory" factory-method="getQueueConnectionFactory"> <constructor-arg index="0"> <value>jdbc:oracle:thin:@//127.0.0.1:1521/hydra</value> </constructor-arg> <constructor-arg index="1" type="java.util.Properties"> <value></value> </constructor-arg> </bean> <bean id="oracleTopicCredentials" class="org.springframework.jms.connection.UserCredentialsConnectionFactoryAdapter"> <property name="targetConnectionFactory"> <ref bean="connectionFactoryOracleAQTopic"/> </property> <property name="username"> <value>AIS_PROVISIONING</value> </property> <property name="password"> <value>read_manual</value> </property> </bean> <bean id="oracleTopic" class="org.apache.camel.component.jms.JmsComponent"> <property name="connectionFactory" ref="oracleTopicCredentials"/> </bean> <!-- Enable web consoles, REST and Ajax APIs and demos Take a look at ${ACTIVEMQ_BASE}/conf/jetty.xml for more details --> <import resource="jetty.xml"/> </beans> |
В данном примере конфигурации настроено следующее:
127.0.0.1:61616
для взаимодействия с агентом HEX по протоколу OpenWire;127.0.0.1:61613
для взаимодействия с агентом HARD по протоколу STOMP;HP_COMMANDS_1
схемы AIS_NET
БД Oracle и помещает их в свою очередь hydra_commands_1
;hydra_command_results_1
и помещает их в очередь HP_COM_RES_1
схемы AIS_NET
БД Oracle;HP_PROFILES_1
схемы AIS_NET
БД Oracle и помещает их в свою очередь hydra_profiles_1
;HP_EQUIPMENT_BINDS_1
схемы AIS_NET
БД Oracle и помещает их в свою очередь hydra_equipment_binds_1
;hydra
и доступна на порту 127.0.0.1:1521
;AIS_PROVISIONING
c паролем read_manual
.## --------------------------------------------------------------------------- ## Licensed to the Apache Software Foundation (ASF) under one or more ## contributor license agreements. See the NOTICE file distributed with ## this work for additional information regarding copyright ownership. ## The ASF licenses this file to You under the Apache License, Version 2.0 ## (the "License"); you may not use this file except in compliance with ## the License. You may obtain a copy of the License at ## ## http://www.apache.org/licenses/LICENSE-2.0 ## ## Unless required by applicable law or agreed to in writing, software ## distributed under the License is distributed on an "AS IS" BASIS, ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ## See the License for the specific language governing permissions and ## limitations under the License. ## --------------------------------------------------------------------------- # Defines credentials that will be used by components (like web console) to access the broker activemq.username=system activemq.password=manager |
В данном примере для работы с брокером настроен пользователь с логином system
и паролем manager
.
## --------------------------------------------------------------------------- ## Licensed to the Apache Software Foundation (ASF) under one or more ## contributor license agreements. See the NOTICE file distributed with ## this work for additional information regarding copyright ownership. ## The ASF licenses this file to You under the Apache License, Version 2.0 ## (the "License"); you may not use this file except in compliance with ## the License. You may obtain a copy of the License at ## ## http://www.apache.org/licenses/LICENSE-2.0 ## ## Unless required by applicable law or agreed to in writing, software ## distributed under the License is distributed on an "AS IS" BASIS, ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ## See the License for the specific language governing permissions and ## limitations under the License. ## --------------------------------------------------------------------------- # # This file controls most of the logging in ActiveMQ which is mainly based around # the commons logging API. # log4j.rootLogger=INFO, console, logfile log4j.logger.org.apache.activemq.spring=WARN log4j.logger.org.apache.activemq.web.handler=WARN log4j.logger.org.springframework=WARN log4j.logger.org.apache.xbean=WARN log4j.logger.org.apache.camel=INFO log4j.logger.org.eclipse.jetty=WARN # When debugging or reporting problems to the ActiveMQ team, # comment out the above lines and uncomment the next. #log4j.rootLogger=DEBUG, logfile, console # Or for more fine grained debug logging uncomment one of these #log4j.logger.org.apache.activemq=DEBUG #log4j.logger.org.apache.camel=DEBUG # Console appender log4j.appender.console=org.apache.log4j.ConsoleAppender log4j.appender.console.layout=org.apache.log4j.PatternLayout log4j.appender.console.layout.ConversionPattern=%5p | %m%n log4j.appender.console.threshold=INFO # File appender log4j.appender.logfile=org.apache.log4j.RollingFileAppender log4j.appender.logfile.file=${activemq.base}/data/provisioning-activemq.log log4j.appender.logfile.maxFileSize=1024KB log4j.appender.logfile.maxBackupIndex=5 log4j.appender.logfile.append=true log4j.appender.logfile.layout=org.apache.log4j.PatternLayout log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n # use some of the following patterns to see MDC logging data # # %X{activemq.broker} # %X{activemq.connector} # %X{activemq.destination} # # e.g. # # log4j.appender.logfile.layout.ConversionPattern=%d | %-20.20X{activemq.connector} | %-5p | %m | %c | %t%n ########### # Audit log ########### log4j.additivity.org.apache.activemq.audit=false log4j.logger.org.apache.activemq.audit=INFO, audit log4j.appender.audit=org.apache.log4j.RollingFileAppender log4j.appender.audit.file=${activemq.base}/data/provisioning-audit.log log4j.appender.audit.maxFileSize=1024KB log4j.appender.audit.maxBackupIndex=5 log4j.appender.audit.append=true log4j.appender.audit.layout=org.apache.log4j.PatternLayout log4j.appender.audit.layout.ConversionPattern=%-5p | %m | %t%n |
В данном примере настроена запись логов работы брокера в файл provisioning-activemq.log
, расположенный в директории с данными очередей. При установке ActiveMQ из пакета hydra-activemq
данный файл будет доступен как /var/log/hydra/activemq/provisioning-activemq.log
. В Docker логи приложения записываются в директорию с данными БД ActiveMQ, а именно: /var/hydra/activemq/provisioning-activemq.log
Согласно конфигурации выше, общий размер логов приложения составляет 5 MB ( 5 файлов по 1024KB, в Docker приложение самостоятельно ротирует логи). Если этого размера будет недостаточно, можно изменить следующие параметры:
log4j.appender.logfile.maxFileSize
- Максимальный размер лога, до его ротации
log4j.appender.audit.maxBackupIndex
- Максимальное количество логов
В случае необходимости можно изменить уровень логирования. Например, для выполнения отладки приложения, чтобы выяснить причины, почему в какой-то момент времени ActiveMQ
перестал работать.
Для этого необходимо изменить конфигурацию log4j.properties
на следующую:
## --------------------------------------------------------------------------- ## Licensed to the Apache Software Foundation (ASF) under one or more ## contributor license agreements. See the NOTICE file distributed with ## this work for additional information regarding copyright ownership. ## The ASF licenses this file to You under the Apache License, Version 2.0 ## (the "License"); you may not use this file except in compliance with ## the License. You may obtain a copy of the License at ## ## http://www.apache.org/licenses/LICENSE-2.0 ## ## Unless required by applicable law or agreed to in writing, software ## distributed under the License is distributed on an "AS IS" BASIS, ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ## See the License for the specific language governing permissions and ## limitations under the License. ## --------------------------------------------------------------------------- # # This file controls most of the logging in ActiveMQ which is mainly based around # the commons logging API. # log4j.rootLogger=DEBUG, console, logfile log4j.logger.org.apache.activemq=DEBUG log4j.logger.org.apache.activemq.spring=DEBUG log4j.logger.org.apache.activemq.web.handler=DEBUG log4j.logger.org.springframework=DEBUG log4j.logger.org.apache.xbean=DEBUG log4j.logger.org.apache.camel=DEBUG log4j.logger.org.eclipse.jetty=DEBUG # Console appender log4j.appender.console=org.apache.log4j.ConsoleAppender log4j.appender.console.layout=org.apache.log4j.PatternLayout log4j.appender.console.layout.ConversionPattern=%5p | %m%n log4j.appender.console.threshold=INFO # File appender log4j.appender.logfile=org.apache.log4j.RollingFileAppender log4j.appender.logfile.file=${activemq.base}/data/provisioning-activemq.log log4j.appender.logfile.maxFileSize=512MB log4j.appender.logfile.maxBackupIndex=12 log4j.appender.logfile.append=true log4j.appender.logfile.layout=org.apache.log4j.PatternLayout log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n # use some of the following patterns to see MDC logging data # # %X{activemq.broker} # %X{activemq.connector} # %X{activemq.destination} # # e.g. # # log4j.appender.logfile.layout.ConversionPattern=%d | %-20.20X{activemq.connector} | %-5p | %m | %c | %t%n ########### # Audit log ########### log4j.additivity.org.apache.activemq.audit=false log4j.logger.org.apache.activemq.audit=INFO, audit log4j.appender.audit=org.apache.log4j.RollingFileAppender log4j.appender.audit.file=${activemq.base}/data/provisioning-audit.log log4j.appender.audit.maxFileSize=1024KB log4j.appender.audit.maxBackupIndex=5 log4j.appender.audit.append=true log4j.appender.audit.layout=org.apache.log4j.PatternLayout log4j.appender.audit.layout.ConversionPattern=%-5p | %m | %t%n |
Может понадобится изменить параметры log4j.appender.logfile.maxFileSize и log4j.appender.audit.maxBackupIndex
исходя из интенсивности использования ActiveMQ.
<!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <!-- An embedded servlet engine for serving up the Admin consoles, REST and Ajax APIs and some demos Include this file in your configuration to enable ActiveMQ web components e.g. <import resource="jetty.xml"/> --> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> <bean id="securityLoginService" class="org.eclipse.jetty.security.HashLoginService"> <property name="name" value="ActiveMQRealm" /> <property name="config" value="${activemq.conf}/jetty-realm.properties" /> </bean> <bean id="securityConstraint" class="org.eclipse.jetty.util.security.Constraint"> <property name="name" value="BASIC" /> <property name="roles" value="user,admin" /> <!-- set authenticate=false to disable login --> <property name="authenticate" value="true" /> </bean> <bean id="adminSecurityConstraint" class="org.eclipse.jetty.util.security.Constraint"> <property name="name" value="BASIC" /> <property name="roles" value="admin" /> <!-- set authenticate=false to disable login --> <property name="authenticate" value="true" /> </bean> <bean id="securityConstraintMapping" class="org.eclipse.jetty.security.ConstraintMapping"> <property name="constraint" ref="securityConstraint" /> <property name="pathSpec" value="/api/*,/admin/*,*.jsp" /> </bean> <bean id="adminSecurityConstraintMapping" class="org.eclipse.jetty.security.ConstraintMapping"> <property name="constraint" ref="adminSecurityConstraint" /> <property name="pathSpec" value="*.action" /> </bean> <bean id="rewriteHandler" class="org.eclipse.jetty.rewrite.handler.RewriteHandler"> <property name="rules"> <list> <bean id="header" class="org.eclipse.jetty.rewrite.handler.HeaderPatternRule"> <property name="pattern" value="*"/> <property name="name" value="X-FRAME-OPTIONS"/> <property name="value" value="SAMEORIGIN"/> </bean> </list> </property> </bean> <bean id="secHandlerCollection" class="org.eclipse.jetty.server.handler.HandlerCollection"> <property name="handlers"> <list> <ref bean="rewriteHandler"/> <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/admin" /> <property name="resourceBase" value="${activemq.home}/webapps/admin" /> <property name="logUrlOnStart" value="true" /> </bean> <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/api" /> <property name="resourceBase" value="${activemq.home}/webapps/api" /> <property name="logUrlOnStart" value="true" /> </bean> <bean class="org.eclipse.jetty.server.handler.ResourceHandler"> <property name="directoriesListed" value="false" /> <property name="welcomeFiles"> <list> <value>index.html</value> </list> </property> <property name="resourceBase" value="${activemq.home}/webapps/" /> </bean> <bean id="defaultHandler" class="org.eclipse.jetty.server.handler.DefaultHandler"> <property name="serveIcon" value="false" /> </bean> </list> </property> </bean> <bean id="securityHandler" class="org.eclipse.jetty.security.ConstraintSecurityHandler"> <property name="loginService" ref="securityLoginService" /> <property name="authenticator"> <bean class="org.eclipse.jetty.security.authentication.BasicAuthenticator" /> </property> <property name="constraintMappings"> <list> <ref bean="adminSecurityConstraintMapping" /> <ref bean="securityConstraintMapping" /> </list> </property> <property name="handler" ref="secHandlerCollection" /> </bean> <bean id="contexts" class="org.eclipse.jetty.server.handler.ContextHandlerCollection"> </bean> <bean id="jettyPort" class="org.apache.activemq.web.WebConsolePort" init-method="start"> <!-- the default port number for the web console --> <property name="host" value="127.0.0.1"/> <property name="port" value="8161"/> </bean> <bean id="Server" depends-on="jettyPort" class="org.eclipse.jetty.server.Server" destroy-method="stop"> <property name="handler"> <bean id="handlers" class="org.eclipse.jetty.server.handler.HandlerCollection"> <property name="handlers"> <list> <ref bean="contexts" /> <ref bean="securityHandler" /> </list> </property> </bean> </property> </bean> <bean id="invokeConnectors" class="org.springframework.beans.factory.config.MethodInvokingFactoryBean"> <property name="targetObject" ref="Server" /> <property name="targetMethod" value="setConnectors" /> <property name="arguments"> <list> <bean id="Connector" class="org.eclipse.jetty.server.ServerConnector"> <constructor-arg ref="Server" /> <!-- see the jettyPort bean --> <property name="host" value="#{systemProperties['jetty.host']}" /> <property name="port" value="#{systemProperties['jetty.port']}" /> </bean> <!-- Enable this connector if you wish to use https with web console --> <!-- bean id="SecureConnector" class="org.eclipse.jetty.server.ServerConnector"> <constructor-arg ref="Server" /> <constructor-arg> <bean id="handlers" class="org.eclipse.jetty.util.ssl.SslContextFactory"> <property name="keyStorePath" value="${activemq.conf}/broker.ks" /> <property name="keyStorePassword" value="password" /> </bean> </constructor-arg> <property name="port" value="8162" /> </bean --> </list> </property> </bean> <bean id="configureJetty" class="org.springframework.beans.factory.config.MethodInvokingFactoryBean"> <property name="staticMethod" value="org.apache.activemq.web.config.JspConfigurer.configureJetty" /> <property name="arguments"> <list> <ref bean="Server" /> <ref bean="secHandlerCollection" /> </list> </property> </bean> <bean id="invokeStart" class="org.springframework.beans.factory.config.MethodInvokingFactoryBean" depends-on="configureJetty, invokeConnectors"> <property name="targetObject" ref="Server" /> <property name="targetMethod" value="start" /> </bean> </beans> |
<!-- Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to You under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. --> <!-- An embedded servlet engine for serving up the Admin consoles, REST and Ajax APIs and some demos Include this file in your configuration to enable ActiveMQ web components e.g. <import resource="jetty.xml"/> --> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd"> <bean id="securityLoginService" class="org.eclipse.jetty.security.HashLoginService"> <property name="name" value="ActiveMQRealm" /> <property name="config" value="${activemq.conf}/jetty-realm.properties" /> </bean> <bean id="securityConstraint" class="org.eclipse.jetty.util.security.Constraint"> <property name="name" value="BASIC" /> <property name="roles" value="admin" /> <property name="authenticate" value="true" /> </bean> <bean id="securityConstraintMapping" class="org.eclipse.jetty.security.ConstraintMapping"> <property name="constraint" ref="securityConstraint" /> <property name="pathSpec" value="/*" /> </bean> <bean id="securityHandler" class="org.eclipse.jetty.security.ConstraintSecurityHandler"> <property name="loginService" ref="securityLoginService" /> <property name="authenticator"> <bean class="org.eclipse.jetty.security.authentication.BasicAuthenticator" /> </property> <property name="constraintMappings"> <list> <ref bean="securityConstraintMapping" /> </list> </property> <property name="handler"> <bean id="sec" class="org.eclipse.jetty.server.handler.HandlerCollection"> <property name="handlers"> <list> <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/admin" /> <property name="resourceBase" value="${activemq.home}/webapps/admin" /> <property name="logUrlOnStart" value="true" /> </bean> <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/fileserver" /> <property name="resourceBase" value="${activemq.home}/webapps/fileserver" /> <property name="logUrlOnStart" value="true" /> <property name="parentLoaderPriority" value="true" /> </bean> <bean class="org.eclipse.jetty.webapp.WebAppContext"> <property name="contextPath" value="/api" /> <property name="resourceBase" value="${activemq.home}/webapps/api" /> <property name="logUrlOnStart" value="true" /> </bean> <bean class="org.eclipse.jetty.server.handler.ResourceHandler"> <property name="directoriesListed" value="false" /> <property name="welcomeFiles"> <list> <value>index.html</value> </list> </property> <property name="resourceBase" value="${activemq.home}/webapps/" /> </bean> <bean id="defaultHandler" class="org.eclipse.jetty.server.handler.DefaultHandler"> <property name="serveIcon" value="false" /> </bean> </list> </property> </bean> </property> </bean> <bean id="contexts" class="org.eclipse.jetty.server.handler.ContextHandlerCollection"> </bean> <bean id="Server" class="org.eclipse.jetty.server.Server" init-method="start" destroy-method="stop"> <property name="connectors"> <list> <bean id="Connector" class="org.eclipse.jetty.server.nio.SelectChannelConnector"> <property name="host" value="127.0.0.1"/> <property name="port" value="8161" /> </bean> </list> </property> <property name="handler"> <bean id="handlers" class="org.eclipse.jetty.server.handler.HandlerCollection"> <property name="handlers"> <list> <ref bean="contexts" /> <ref bean="securityHandler" /> </list> </property> </bean> </property> </bean> </beans> |
Согласно данному примеру конфигурации веб-интерфейс контроля состояния очередей будет доступен по адресу: http://127.0.0.1:8161/admin/queues.jsp
.
## --------------------------------------------------------------------------- ## Licensed to the Apache Software Foundation (ASF) under one or more ## contributor license agreements. See the NOTICE file distributed with ## this work for additional information regarding copyright ownership. ## The ASF licenses this file to You under the Apache License, Version 2.0 ## (the "License"); you may not use this file except in compliance with ## the License. You may obtain a copy of the License at ## ## http://www.apache.org/licenses/LICENSE-2.0 ## ## Unless required by applicable law or agreed to in writing, software ## distributed under the License is distributed on an "AS IS" BASIS, ## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ## See the License for the specific language governing permissions and ## limitations under the License. ## --------------------------------------------------------------------------- # Defines users that can access the web (console, demo, etc.) # username: password [,rolename ...] admin: admin, admin |
В данном примере для доступа к веб-интерфейсу контроля состояния очередей создан пользователь с логином admin
, паролем admin
и ролью admin
.
После настройки экземпляра необходимо его активировать, создав в /etc/hydra/activemq/instances-enabled
указывающую на него символьную ссылку и перезапустить ActiveMQ инициализационным скриптом.
root@server:~# cd /etc/hydra/activemq/instances-enabled && \ ln -s ../instances-available/provisioning |
root@server:~# /etc/init.d/hydra-activemq restart |
user@server:~$ ls -lR /etc/hydra/activemq/instances-available/ && \ ls -l /etc/hydra/activemq/instances-enabled/ && \ sudo /etc/init.d/hydra-activemq status |
Для доступа к административному веб-интерфейсу брокера можно использовать консольный браузер links
:
user@server:~$ links http://admin:admin@127.0.0.1:8161/admin/queues.jsp |