Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

Данное приложение, содержащее все необходимые для работы с БД Oracle библиотеки, может быть установлено в систему Debian виде пакета hydra-activemq из репозитория deb.hydra-billing.com. Подключение данного репозитория может быть выполнено сотрудниками компании Латера в рамках услуги техподдержки.

Предварительные требования

Для работы последней версии ActiveMQ необходимо наличие на сервере Oracle Java версии 8. Установка может быть выполнена следующим образом:

Установка Oracle Java 8 на Debian Wheezy
root@server:~# echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main" | tee /etc/apt/sources.list.d/webupd8team-java.list              && \
               echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main" | tee -a /etc/apt/sources.list.d/webupd8team-java.list       && \
               apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys EEA14886                                                               && \
               echo oracle-java8-installer shared/accepted-oracle-license-v1-1 select true | sudo /usr/bin/debconf-set-selections                       && \
               aptitude update                                                                                                                          && \
               aptitude install oracle-java8-installer
Проверка версии Java
root@server:~# java -version
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)

Настройка ActiveMQ

Конфигурация экземпляра брокера, необходимая для работы агентов HARD и HEX, а также приложения «Портал аутентификации» (HAP) состоит из нескольких частей, описанных ниже.

Основные параметры экземпляра брокера

/etc/hydra/activemq/instances-available/hard_hex_hap/activemq.xml
<beans
  xmlns="http://www.springframework.org/schema/beans"
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd
  http://activemq.apache.org/schema/core http://activemq.apache.org/schema/core/activemq-core.xsd http://camel.apache.org/schema/spring http://camel.apache.org/schema/spring/camel-spring.xsd">
    <!-- Allows us to use system properties as variables in this configuration file -->
    <bean class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" />
    <!--
        The <broker> element is used to configure the ActiveMQ broker.
    -->
    <broker xmlns="http://activemq.apache.org/schema/core" brokerName="localhost" dataDirectory="${activemq.data}">
        <destinationPolicy>
            <policyMap>
              <policyEntries>
                <policyEntry topic=">" >
                    <!-- The constantPendingMessageLimitStrategy is used to prevent
                         slow topic consumers to block producers and affect other consumers
                         by limiting the number of messages that are retained
                         For more information, see:
                         http://activemq.apache.org/slow-consumer-handling.html
                    -->
                  <pendingMessageLimitStrategy>
                    <constantPendingMessageLimitStrategy limit="1000"/>
                  </pendingMessageLimitStrategy>
                </policyEntry>
              </policyEntries>
            </policyMap>
        </destinationPolicy>

        <!--
            The managementContext is used to configure how ActiveMQ is exposed in
            JMX. By default, ActiveMQ uses the MBean server that is started by
            the JVM. For more information, see:
            http://activemq.apache.org/jmx.html
        -->
        <managementContext>
            <managementContext createConnector="false"/>
        </managementContext>
        <!--
            The transport connectors expose ActiveMQ over a given protocol to
            clients and other brokers. For more information, see:
            http://activemq.apache.org/configuring-transports.html
        -->
        <transportConnectors>
            <!-- DOS protection, limit concurrent connections to 1000 and frame size to 100MB -->
            <transportConnector name="openwire" uri="tcp://127.0.0.1:61616?maximumConnections=1000&amp;wireFormat.maxFrameSize=104857600"/>
            <transportConnector name="stomp" uri="stomp://127.0.0.1:61613?transport.hbGracePeriodMultiplier=1.5"/>
        </transportConnectors>
        <!-- destroy the spring context on shutdown to stop jetty -->
        <shutdownHooks>
            <bean xmlns="http://www.springframework.org/schema/beans" class="org.apache.activemq.hooks.SpringContextHook" />
        </shutdownHooks>
    </broker>
    <camelContext xmlns="http://camel.apache.org/schema/spring" id="camel">
        <route>
            <from uri="oracleTopic:topic:AIS_NET.HP_COMMANDS_1?clientId=ActiveMQ&amp;durableSubscriptionName=HP"/>
            <to uri="activemq:queue:hydra_commands_1"/>
        </route>
        <route>
            <from uri="activemq:queue:hydra_command_results_1"/>
            <to uri="oracleTopic:topic:AIS_NET.HP_COM_RES_1?clientId=ActiveMQ&amp;durableSubscriptionName=HP"/>
        </route>
        <route>
            <from uri="oracleTopic:topic:AIS_NET.HP_PROFILES_1?clientId=ActiveMQ&amp;durableSubscriptionName=HP"/>
            <to uri="activemq:queue:hydra_profiles"/>
        </route>
        <route>
            <from uri="oracleTopic:topic:AIS_NET.HP_EQUIPMENT_BINDS_1?clientId=ActiveMQ&amp;durableSubscriptionName=HP"/>
            <to uri="activemq:queue:hydra_equipment_binds"/>
        </route>
    </camelContext>
    <bean id="activeMQConfig" class="org.apache.activemq.camel.component.ActiveMQConfiguration">
        <property name="cacheLevelName" value="CACHE_CONSUMER" />
        <property name="concurrentConsumers" value="1" />
    </bean>
    <bean id="connectionFactoryOracleAQTopic" class="oracle.jms.AQjmsFactory"
          factory-method="getQueueConnectionFactory">
        <constructor-arg index="0">
            <value>jdbc:oracle:thin:@//127.0.0.1:1521/hydra</value>
        </constructor-arg>
        <constructor-arg index="1" type="java.util.Properties">
            <value></value>
        </constructor-arg>
    </bean>
    <bean id="oracleTopicCredentials" class="org.springframework.jms.connection.UserCredentialsConnectionFactoryAdapter">
        <property name="targetConnectionFactory">
            <ref bean="connectionFactoryOracleAQTopic"/>
        </property>
        <property name="username">
            <value>AIS_PROVISIONING</value>
        </property>
        <property name="password">
            <value>read_manual</value>
        </property>
    </bean>
    <bean id="oracleTopic" class="org.apache.camel.component.jms.JmsComponent">
        <property name="connectionFactory" ref="oracleTopicCredentials"/>
    </bean>
    <!--
        Enable web consoles, REST and Ajax APIs and demos
        Take a look at ${ACTIVEMQ_BASE}/conf/jetty.xml for more details
    -->
    <import resource="jetty.xml"/>
</beans>

В данном примере конфигурации настроено следующее:

  • Брокер слушает порт 127.0.0.1:61616 для взаимодействия с агентом HEX по протоколу OpenWire;
  • Брокер слушает порт 127.0.0.1:61613 для взаимодействия с агентом HARD по протоколу STOMP;
  • Сообщения с командами для выполнения агентом HEX брокер извлекает из очереди HP_COMMANDS_1 схемы AIS_NET БД Oracle и помещает их в свою очередь hydra_commands_1;
  • Сообщения с результатами выполнения команд от агента HEX брокер извлекает из своей очереди hydra_command_results_1 и помещает их в очередь HP_COM_RES_1 схемы AIS_NET БД Oracle;
  • Сообщения с профилями оборудования для агента HARD брокер извлекает из очереди HP_PROFILES_1 схемы AIS_NET БД Oracle и помещает их в свою очередь hydra_profiles;
  • Сообщения с привязками оборудования для агента HARD брокер извлекает из очереди HP_EQUIPMENT_BINDS_1 схемы AIS_NET БД Oracle и помещает их в свою очередь hydra_equipment_binds;
  • БД Oracle называется hydra и доступна на порту 127.0.0.1:1521;
  • Для работы с БД Oracle используется пользователь базы данных AIS_PROVISIONING c паролем read_manual.

Данные для доступа к очередям

/etc/hydra/activemq/instances-available/hard_hex_hap/credentials.properties
## ---------------------------------------------------------------------------
## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements.  See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License.  You may obtain a copy of the License at
## 
## http://www.apache.org/licenses/LICENSE-2.0
## 
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
## ---------------------------------------------------------------------------
# Defines credentials that will be used by components (like web console) to access the broker
activemq.username=system
activemq.password=manager

В данном примере для работы с брокером настроен пользователь с логином system и паролем manager.

Параметры ведения логов

/etc/hydra/activemq/instances-available/hard_hex_hap/log4j.properties
## ---------------------------------------------------------------------------
## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements.  See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License.  You may obtain a copy of the License at
## 
## http://www.apache.org/licenses/LICENSE-2.0
## 
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
## ---------------------------------------------------------------------------
#
# This file controls most of the logging in ActiveMQ which is mainly based around 
# the commons logging API.
#
log4j.rootLogger=INFO, console, logfile
log4j.logger.org.apache.activemq.spring=WARN
log4j.logger.org.apache.activemq.web.handler=WARN
log4j.logger.org.springframework=WARN
log4j.logger.org.apache.xbean=WARN
log4j.logger.org.apache.camel=INFO
log4j.logger.org.eclipse.jetty=WARN
# When debugging or reporting problems to the ActiveMQ team,
# comment out the above lines and uncomment the next.
#log4j.rootLogger=DEBUG, logfile, console
# Or for more fine grained debug logging uncomment one of these
#log4j.logger.org.apache.activemq=DEBUG
#log4j.logger.org.apache.camel=DEBUG
# Console appender
log4j.appender.console=org.apache.log4j.ConsoleAppender
log4j.appender.console.layout=org.apache.log4j.PatternLayout
log4j.appender.console.layout.ConversionPattern=%5p | %m%n
log4j.appender.console.threshold=INFO
# File appender
log4j.appender.logfile=org.apache.log4j.RollingFileAppender
log4j.appender.logfile.file=${activemq.base}/data/hard_hex_hap-activemq.log
log4j.appender.logfile.maxFileSize=1024KB
log4j.appender.logfile.maxBackupIndex=5
log4j.appender.logfile.append=true
log4j.appender.logfile.layout=org.apache.log4j.PatternLayout
log4j.appender.logfile.layout.ConversionPattern=%d | %-5p | %m | %c | %t%n
# use some of the following patterns to see MDC logging data
#
# %X{activemq.broker}
# %X{activemq.connector}
# %X{activemq.destination}
#
# e.g.
#
# log4j.appender.logfile.layout.ConversionPattern=%d | %-20.20X{activemq.connector} | %-5p | %m | %c | %t%n
###########
# Audit log
###########
log4j.additivity.org.apache.activemq.audit=false
log4j.logger.org.apache.activemq.audit=INFO, audit
log4j.appender.audit=org.apache.log4j.RollingFileAppender
log4j.appender.audit.file=${activemq.base}/data/hard_hex_hap-audit.log
log4j.appender.audit.maxFileSize=1024KB
log4j.appender.audit.maxBackupIndex=5
log4j.appender.audit.append=true
log4j.appender.audit.layout=org.apache.log4j.PatternLayout
log4j.appender.audit.layout.ConversionPattern=%-5p | %m | %t%n

В данном примере настроена запись логов работы брокера в файл hard_hex_hap-activemq.log, расположенный в директории с данными очередей. При установке ActiveMQ из пакета hydra-activemq данный файл будет доступен как /var/log/hydra/activemq/hard_hex_hap-activemq.log.

Параметры веб-интерфейса контроля состояния очередей

/etc/hydra/activemq/instances-available/hard_hex_hap/jetty.xml
    <!--
        Licensed to the Apache Software Foundation (ASF) under one or more contributor
        license agreements. See the NOTICE file distributed with this work for additional
        information regarding copyright ownership. The ASF licenses this file to You under
        the Apache License, Version 2.0 (the "License"); you may not use this file except in
        compliance with the License. You may obtain a copy of the License at
        http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or
        agreed to in writing, software distributed under the License is distributed on an
        "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
        implied. See the License for the specific language governing permissions and
        limitations under the License.
    -->
    <!--
        An embedded servlet engine for serving up the Admin consoles, REST and Ajax APIs and
        some demos Include this file in your configuration to enable ActiveMQ web components
        e.g. <import resource="jetty.xml"/>
    -->
<beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans.xsd">
    <bean id="securityLoginService" class="org.eclipse.jetty.security.HashLoginService">
        <property name="name" value="ActiveMQRealm" />
        <property name="config" value="${activemq.conf}/jetty-realm.properties" />
    </bean>
    <bean id="securityConstraint" class="org.eclipse.jetty.util.security.Constraint">
        <property name="name" value="BASIC" />
        <property name="roles" value="admin" />
        <property name="authenticate" value="true" />
    </bean>
    <bean id="securityConstraintMapping" class="org.eclipse.jetty.security.ConstraintMapping">
        <property name="constraint" ref="securityConstraint" />
        <property name="pathSpec" value="/*" />
    </bean>
    <bean id="securityHandler" class="org.eclipse.jetty.security.ConstraintSecurityHandler">
        <property name="loginService" ref="securityLoginService" />
        <property name="authenticator">
            <bean class="org.eclipse.jetty.security.authentication.BasicAuthenticator" />
        </property>
        <property name="constraintMappings">
            <list>
                <ref bean="securityConstraintMapping" />
            </list>
        </property>
        <property name="handler">
            <bean id="sec" class="org.eclipse.jetty.server.handler.HandlerCollection">
                <property name="handlers">
                    <list>
                        <bean class="org.eclipse.jetty.webapp.WebAppContext">
                            <property name="contextPath" value="/admin" />
                            <property name="resourceBase" value="${activemq.home}/webapps/admin" />
                            <property name="logUrlOnStart" value="true" />
                        </bean>
                        <bean class="org.eclipse.jetty.webapp.WebAppContext">
                            <property name="contextPath" value="/fileserver" />
                            <property name="resourceBase" value="${activemq.home}/webapps/fileserver" />
                            <property name="logUrlOnStart" value="true" />
                            <property name="parentLoaderPriority" value="true" />
                        </bean>
                        <bean class="org.eclipse.jetty.webapp.WebAppContext">
                            <property name="contextPath" value="/api" />
                            <property name="resourceBase" value="${activemq.home}/webapps/api" />
                            <property name="logUrlOnStart" value="true" />
                        </bean>
                        <bean class="org.eclipse.jetty.server.handler.ResourceHandler">
                            <property name="directoriesListed" value="false" />
                            <property name="welcomeFiles">
                                <list>
                                    <value>index.html</value>
                                </list>
                            </property>
                            <property name="resourceBase" value="${activemq.home}/webapps/" />
                        </bean>
                        <bean id="defaultHandler" class="org.eclipse.jetty.server.handler.DefaultHandler">
                            <property name="serveIcon" value="false" />
                        </bean>
                    </list>
                </property>
            </bean>
        </property>
    </bean>
    <bean id="contexts" class="org.eclipse.jetty.server.handler.ContextHandlerCollection">
    </bean>
    <bean id="Server" class="org.eclipse.jetty.server.Server" init-method="start"
        destroy-method="stop">
        <property name="connectors">
            <list>
                <bean id="Connector" class="org.eclipse.jetty.server.nio.SelectChannelConnector">
                    <property name="host" value="127.0.0.1"/>
                    <property name="port" value="8161" />
                </bean>
            </list>
        </property>
        <property name="handler">
            <bean id="handlers" class="org.eclipse.jetty.server.handler.HandlerCollection">
                <property name="handlers">
                    <list>
                        <ref bean="contexts" />
                        <ref bean="securityHandler" />
                    </list>
                </property>
            </bean>
        </property>
    </bean>
</beans>

Согласно данному примеру конфигурации веб-интерфейс контроля состояния очередей будет доступен по адресу http://127.0.0.1:8161/.

Данные для доступа к веб-интерфейсу контроля состояния очередей

/etc/hydra/activemq/instances-available/hard_hex_hap/jetty-realm.properties
## ---------------------------------------------------------------------------
## Licensed to the Apache Software Foundation (ASF) under one or more
## contributor license agreements.  See the NOTICE file distributed with
## this work for additional information regarding copyright ownership.
## The ASF licenses this file to You under the Apache License, Version 2.0
## (the "License"); you may not use this file except in compliance with
## the License.  You may obtain a copy of the License at
## 
## http://www.apache.org/licenses/LICENSE-2.0
## 
## Unless required by applicable law or agreed to in writing, software
## distributed under the License is distributed on an "AS IS" BASIS,
## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
## See the License for the specific language governing permissions and
## limitations under the License.
## ---------------------------------------------------------------------------
# Defines users that can access the web (console, demo, etc.)
# username: password [,rolename ...]
admin: admin, admin

В данном примере для доступа к веб-интерфейсу контроля состояния очередей создан пользователь с логином admin, паролем admin и ролью admin.

  • No labels